FAQs

Share to Facebook Share to Twitter Share to Google Share to Pinterest

Not sure how to clean your appliance? Are there any features you're not making use of? Find answers to common product questions by selecting from the categories below.

General

Where can I purchase replacement/spare parts?toggle

Spare parts can be purchased from your nearest Authorised Sunbeam Service Agent/Repairer. A list of Sunbeam Authorised Service Agents/Repairers is available here

Who can I contact if I require further assistance with my product?toggle

For assistance or troubleshooting advice on your product, please contact our Customer Service department on 1300 881 861. Alternatively, you can send us an email by completing the form in the Service & Support page

Where can I find an instruction manual for my product?toggle

If you have misplaced your instruction manual, you can search and downloaded a copy here

I have a faulty product. What are my options?toggle

If within warranty period

  • If your product is within warranty and you have a retained a copy of your receipt, please return the product to the place of purchase for a replacement

If outside warranty period

Where is my nearest service centre/agent?toggle

A list of Sunbeam Authorised Service Agents/Repairers is available here

Back to top

Breadmakers

How can I achieve a perfect loaf using Defiance Bread Mix?toggle

To make a 750gm loaf (defiance) White

You need:

  • 1 ½ teaspoons yeast
  • 600gms Breadmix
  • 300mls water

Applicable to all models: All

How do I prevent my bread from burning on the sides and bottom?toggle

If using one of the recipes provided be sure to weight the flour and also check the type of yeast you are using.

Normally for Tandaco we recommend:

  • Full sachet of yeast
  • Defiance - 1 ½ teaspoons
  • Laucke/Lowan - 1 ½ teaspoons

If using a bread mix check water content and also yeast content again. (Unfortunately we have no control over breadmixes as all ingredients are included by manufacturer).

Applicable to all models: BM7800 and BM2100

Why is my bread not baked in the centre?toggle

Please check ingredients as you may have too much liquid, this will result in a moist centre. Try reducing the liquid by 15mls.

Applicable to all models: All

How long does the bread pan last?toggle

The Bread pan should last anywhere between 1 -2 years depending on usage. You can also spray the base of the pan with Pure & Simple to help protect the surface.

Applicable to all models: All

Why is the top of my bread not browning?toggle

When using the recipes provided to encourage browning you can increase the amount of butter & sugar in the recipe.

If you are using a bread mix- brush the top of the loaf with a little oil or egg yolk 25 minutes prior to baking.

Applicable to all models: All

Back to top

Frypans

Can oven bags be used in my fry pan?toggle

Yes, as long as the temperature is monitored and the cooking process is supervised at all times.

Applicable to all models: All

Is the frypan Dishwasher safe?toggle

Yes the heating element is totally sealed so you are able to fully immerse your frypan in water.

NOTE: The control probe cannot be immersed and needs to be removed prior to placing the frypan in the dishwasher

Applicable to all models: All

How can I remove burnt food from the base of my pan?toggle

Fill the pan with 20mm water, cover & simmer for 5 minutes or until food softens & lifts off.

For stubborn stains

  • leave the frypan to soak overnight OR
  • put some bi-carb soda into a paste spread on the base of the frypan. Leave it for about 20 minutes then rinse.

What will happen if I use metal utensils in my Teflon coated fry pan.toggle

Some of our models recommend that you can use both metal and non-metal utensils although you will need to be careful when moving food around as this can scratch the surface.

Once scratched the Teflon will peel at which point we do not recommend that you keep using.

Applicable to all models: Teflon models

My fry pan is making a humming noisetoggle

Please ensure that you have preheated as above on the high setting and then dropped down as this will eliminate humming noise. If it still continues please return for a replacement.

Applicable to all models: All

My frypan seems to be burning the food even on low tempstoggle

With most of the fry pans you need to preheat at a high temp of 7-8 first then add oil and drop down to 4 -5. This will maintain the high temp without simmering and boiling.

Applicable to all models: All

Back to top

Irons

What can I use to clean the sole-plate of my iron?toggle

Just before the iron completely cools down, put some eucalyptus oil in a cloth then wipe it on the surface of the sole-plate to remove buildup and to clean.

Applicable to all models: All

Why is my iron not heating up?toggle

Occasionally, a buildup of lint under the thermostat control can prevent the iron from heating.

To remove:

  • Unplug the iron from the power outlet.
  • Slowly turn the temperature control clockwise and anti-clockwise from minimum to maximum. Do this several times.

Applicable to all models: All

Why is my iron not steaming?toggle

A buildup of scale on the steam valve can affect the steam function of your iron.

To avoid this problem:

  • Remove the steam valve from the iron, wash and dry thoroughly.
  • Fill the iron with water and turn the temperature dial to the linen setting.
  • Allow the iron to steam for approximately 3 minutes.
  • If applicable, press the shot of steam button a couple of times to clear any buildup.

Applicable to all models: All

How do I store the cord of my iron?toggle

When storing your iron make sure you do not wrap the cord around the iron (leave it loose).

If the cord is wrapped around the iron, it may cause fatigue to the cord and damage the wiring.

Applicable to all models: All

My iron was left for more than 5 minutes and the safety auto-off has activated. How do I use my iron again?toggle

You will need to:

  • Turn off the iron then turn it back on again.
  • Turn the steam dial to the minimum setting and start ironing for about 5 minutes.

This will deactivate the safety auto-off and the iron will start working.

Applicable to all models: All

What do I do if my iron is faulty?toggle

You will need to take your iron:

  • If within the warranty period, back to the point of sale (along with proof of purchase) OR
  • If outside the warranty period, to an authorised Service Agent

Applicable to all models: All

Back to top

Kettles

My water level has condensation in it. Is there a reason for this?toggle

When only boiling a small amount of water, condensation can sometimes show in the water window. If the kettle has a larger volume of water in it, the condensation will not occur.

How do I clean the exterior of my kettle?toggle

A damp cloth with very little detergent can be used to wipe the body of your kettle. Once wiped over, dry with a soft clean cloth.

My Kettle will not stop boiling. Is there something I can do?toggle

At times, the filter inside your kettle can become dislodged. If this is the case, lift the lid and check if it’s in place. Refer to your instruction booklet for directions.

What can I do to keep my kettle in good condition?toggle

Mineral deposits in tap water may build up inside your kettle over time. To remove this build up, use Sunbeam Liquid Descaler (KE0100) which is a simple to use, non-toxic cleaner. Alternatively you can try the following:

  • Fill the kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight. DO NOT BOIL.
  • Empty the solution from the kettle. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use.

My brand new kettle has a strange smell and the water has a taste. How do I rectify this?toggle

This can often be caused by different mineral deposits in the water supply. However, you can try a vinegar solution:

  • Fill the kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight. DO NOT BOIL.

Empty the solution from the kettle. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use.

Why doesn't my kettle automatically switch off?toggle

If your kettle isn't automatically switching itself off, there is a fault with the switch.

You will need to take the kettle:

  • If within the warranty period, back to the point of sale (along with proof of purchase) OR
  • If outside the warranty period, to an authorised Service Agent

Applicable to all models: All

What is Sunbeam's 3-Way Safety System?toggle

Safety is a major consideration in the design of a Sunbeam kettle. This is why we have developed our 3-Way Safety System, which ensures that your kettle will:

  • 1. Automatically switch off after boiling
    For convenience, safety and energy efficiency, your Sunbeam kettle will automatically switch off after boiling.
  • 2. Cut-out for boil-dry-protection
    If the kettle is operated without water, it will automatically cut-out, preventing any damage to the element. If this occurs, allow the kettle to cool before filling with cold water and re-boiling.
  • 3. Shut-down in case of overheating
    In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to a Sunbeam Service Centre or Appointed Service Agent.

Why was the water gauge in my kettle discoloured?toggle

Mineral deposits in water may cause the kettle interior to discolour.

To remove this buildup, you can:

  • Fill the kettle with 3 cups of white vinegar and remainder water.
  • Allow to stand overnight, making sure you do not boil.
  • Discard solution, refill kettle with water, boil & discard.

If this does not get rid of the buildup you can then purchase the Sunbeam liquid descaler which is available from an authorised Service Agent.

Applicable to all models: All

How do I clean my stainless steel kettle?toggle

You can clean the kettle with Stainless steel cleaner OR Polish with a wet cloth in a circular motion, then dry with a soft cloth.

Applicable to all models: KE6300KE7300KE7350KE7500/RKE7600/BKE7900 and KE9200/R

Back to top

Blenders

What would happen if I put my jug to wash in the dishwasher?toggle

If not placed on the top shelf and the temperature is set on high the jug will crack.

Applicable to all models: All

Can you blend hot soup in the blender?toggle

No.
You can only blend soup once it has cooled down completely.

Applicable to all models: All

When washing the jug is it best to remove the blades?toggle

If washing the jug in relatively warm/hot water it is best to remove the blades, as having the blades in will cause the base of the jug to crack.

Applicable to all models: All

Back to top

Water Filters

Is there any way to prolong the life of the filter?toggle

No

I have only just replaced my new filter and it is dripping from the spout.toggle

At times, this can occur due to an air bubble. To eliminate, remove the filter and shake out any excess water into a sink. Place filter back into the unit. This should eliminate the leaking , however, if it continues to leak, please contact our Consumer Support line on 1300 881 861.

Where can I purchase the replacement filter cartridges from?toggle

Any of our authorized dealers or Sunbeam Authorized Service Agents.

What type of filter does the pure source contain?toggle

The pure source contains a micro-fine 0.5 micron carbon block filter. There is another filter available as well called the General Purpose filter. (Mainly used for hard water areas).

My filter is leaking from the back.toggle

If you haven’t changed the filter recently, it may be that it is full and needs to be changed. However, if this is a new filter, some water may have made its way into the filter. You can remove this by simply shaking the water out and re-placing the filter back again. If it continues to leak, please contact our customer service center on 1300 881 861.

How long does the filter last?toggle

If used with municipally treated water it should last up to 750 litres. If in hard water areas it will have a shorter life.

Applicable to all models: All

Can I use my water chiller to filter tank water?toggle

This is not recommended, as the filters will still block.

Applicable to all models: All

What is the shelf life of the filter cartridge?toggle

The carbon block filter has no shelf life. It will still work effectively irrespective of length of time before first use.

Once in-use, the filter should last up to 750 litres, depending on the quality and source of the water.

Applicable to all models: All

How long does it normally take for the water to chill?toggle

Depending on the ambient temperature, on first use we recommend approximately an hour and 15 minutes, the blue light indicator will come on when ready.

Applicable to all models: WF6000

Back to top

Toasters

I have a 4 slice Toaster and when cooking 1 or 2 slices it is uneven.toggle

When cooking less slices please ensure that you place one slice on one side in the middle and one slice on other side in the middle to balance the elements

Applicable to all models: All 4 slice models

Why is my toast uneven?toggle

Toasting will be affected by the size, sugar and fat content of the bread.

It is normal for some unevenness to occur in browning.

Applicable to all models: All

Can you store the cord in the cord storage when toasting?toggle

No. Unwind the cord fully when toasting. Allow the toaster to cool completely before storing.

Applicable to all models: All

How do I clean my toaster?toggle

Unplug from power outlet, wipe down the exterior with a damp cloth and dry thoroughly, to clean underneath remove the crumb tray and ensure that you empty regularly.

Applicable to all models: All

Back to top

Coffee

At what temperature does the coffee come out at?toggle

The coffee extraction comes out at approximately 72 degrees Celsius.

This can be affected by:

  • Ambient/room temperature
  • Cup/glass temperature at time of extraction
  • Freezing/Refrigerating coffee beans or grind may affect the extraction temperature.

Applicable to all models: All

The steam wand on my coffee machine seems to be blocked. How do I clear the blockage?toggle

With the machine switched off, visually inspect the steam nozzle to see if it is physically blocked (for example, milk may have lodged and solidified in the mouth of the valve).

If it is blocked, you should be able to clear it with a small pin.

You may also need to prime the unit (to clear out any air pockets that may have formed).

  • Make sure the water tank/reservoir is all the way in.
  • Place a bowl under the steam wand (and if applicable, under the hot water wand as well).
  • Turn on the steam wand (and if applicable, hot water wand) and let it run for 30 seconds to 1 minute. 

This should help clear any "air lock".

Applicable to all models: All

My coffee extraction seems to be coming out too fast. How do I fix this?toggle

If your extraction is coming out too fast, adjust your grinder to a finer setting.

If your extraction is coming out too slow, adjust your grinder to a coarser setting.

Applicable to all models: All

How long should I allow the coffee extraction to go for?toggle

Coffee extraction should take somewhere from 6 to 10 seconds.

Applicable to all models: All

Back to top

Electric Blankets

My electric blanket has a digital control with a boost button. How does the Boost function work?toggle

The Boost function is idea for preheating the bed, or for an extra burst of heat during chilly nights. Pressing the Boost button heats the blanket to the maximum heat setting for 30 minutes, and then returns the blanket to the previously selected heat setting.

Pressing the boost button during the boost period will restart the 30 minute boost cycle. To interrupt the boost cycle, move the switch to the OFF position and then turn it back on.

One side of my electric blanket is not heating. What could be wrong?toggle

If one side of your double, queen or king side electric blanket fails to heat, this could be the result of a fault within the electric blanket or the control. To identify the source of the fault, take the control from the side of the bed that is working and plug it into the side that is not heating. Be sure to switch the control to the off position and turn the power off at the power outlet before removing the control from the blanket. Connect the control to the side that is not heating before turning on the power and switching the control on. If this side of the blanket now heats, there is a fault with the other control. Contact Sunbeam Customer Service for a replacement control. Be sure to have the control handy so that you can quote the model number on the back for a suitable replacement.

If the blanket still does not heat with the working control, there is a fault within the blanket itself, and you will require a replacement. If the blanket is within warranty return it to the place of purchase with your receipt. If it is not within warranty contact Sunbeam Customer Service or an authorised Service Agent.

The control on my single electric blanket is on the wrong side. What can I do?toggle

If you have a single tie-down or Fitted electric blanket, you could turn the blanket over so that the control is on the preferred side. Note that this will result in the control socket being on top of the blanket rather than underneath it. Alternatively, contact Sunbeam Customer Service for a replacement control that has a longer cord that runs underneath the mattress so that the control is on the preferred side.

How long is the guarantee period on Sunbeam electric blankets?toggle

All Sunbeam Safe & Sound electric blankets have a three year replacement guarantee. All other Sunbeam electric blankets have a two year replacement guarantee. Please retain your sales receipt as proof of purchase.

How much does my electric blanket cost to operate?toggle

Electric blankets and heated throws are one of the most cost-effective ways to keep warm, as they only warm your bed or body, and do not waste energy heating the room or the entire house. A Safe & Sound electric blanket uses 150 watts maximum (at the highest setting), which costs around 2 cents per hour . Once your selected temperature has been reached, the electric blanket or throw only uses the amount of power required to maintain that heat setting, making it even more energy efficient.

My electric blanket has a 9 heat control with two timer settings (75 mins and 12 hrs). When does the light on the control go out?toggle

There are two lights on the 972A6 electric blanket control, one behind the temperature dial to indicate the selected temperature setting, and one labelled Timer Off.

When the blanket is switched ON and heating (i.e. during the selected timer period) the light behind the temperature dial illuminates to indicate that the blanket is on and heating, and the timer light is OFF.

Once the timer period has ended the temperature dial light goes out and the blanket switches off. The Timer Off light illuminate to indicate that the timer period has ended. To restart the timer period, move the slide switch to the off position then back to the selected timer setting.

If a fault is detected within the blanket, the timer light will FLASH.

What is cosy feet heating, and can it be controlled separately to the rest of the blanket?toggle

Cosy feet heating refers to extra warmth at the foot area of the blanket. It delivers extra heat to your feet, while keeping the rest of your body comfortably warm. The heating wires are closer together in the foot zone of the blanket, making this area around 8°C warmer than the body zone. It is part of the blanket's overall heating element and cannot be controlled separately.

When using my new electric blanket I seem to get a slight tingling sensation. What causes this and is it cause for concern?toggle

If you experience a slight tingling sensation when using your electric blanket, this is most likely caused by static electricity. Polyester bedding can often increase the static within your bed. To eliminate the static, remove the controls and wash the blanket according to the instructions. If the static tingling continues, return the electric blanket to the place of purchase for a replacement.

Why does my electric blanket come with two controls?toggle

All double, queen and king size electric blankets are supplied with two controls so personal comfort levels can be set on each side of the bed.

Why is the light on my electric blanket control flashing?toggle

If you have a 9 heat timer control model 972A6 or 972A5 (refer to the rear of the control for the model number) it could mean that a fault has been detected within the blanket or control. Switch the control to the off position and turn the power off at the power outlet. Check that the control is inserted into the socket on the blanket correctly before turning the power on at the outlet and switching the control on again. If the light continues to flash, contact Sunbeam Customer Service for assistance.

If you have a 9 heat timer control model 972A1, a flashing Timer light indicates that the timer period has ended (75 minutes or 12 hours, depending on the setting you have selected). To restart the timer period, move the slide switch to the off position then back to the selected timer setting.

What is SleepPerfect Technology?toggle

All Sunbeam Safe & Sound electric blankets contain our exclusive SleepPerfect Technology which senses changes in room and body temperature and adjusts the power input to maintain your selected heat setting. So no matter how cold it gets, SleepPerfect® Technology ensures your comfort level is just right.

SleepPerfect Technology is also fast. It heats the blanket to maximum temperature in just 10 minutes – a fraction of the heat up time of other electric blanket, so there's no need for hours of preheating before bedtime. Plus, SleepPerfect® Technology includes nine levels of safety protection, making Sunbeam Safe & Sound® electric blankets safer than any other.

What is the benefit of a Safe & Sound Waterproof electric blanket, and what is it made from?toggle

Designed to keep kids warm and the mattress dry, the Safe & Sound Waterproof electric blanket is a waterproof mattress protector and electric blanket in one. It contains a durable waterproof inner membrane that prevents spills from reaching the heating wires or soaking through to the mattress. This clever electric blanket can stay on the bed year round, simply detach the control and store during the warmer months. And like all Sunbeam electric blankets, it can even be machine washed and tumble dried.

  • Top: printed polyester polar fleece
  • Membrane: polyurethane
  • Blanket base; non-woven polyester
  • Fitted skirt: polyester

What is the difference between a Fitted and Tie-Down electric blanket?toggle

Just like a fitted sheet, a Sunbeam fitted electric blanket has deep 50cm sides – to fit even the deepest mattress – and a strong elastic cord to keep it in place. A fully fitted electric blanket covers the entire top surface of the mattress and is much easier to fit and remove from the bed. A Tie-Down electric blanket has cotton tie tapes that are secured underneath the mattress to keep it in place. Most Sunbeam Safe & Sound electric blankets are fully fitted for added convenience.

Can I use an electric blanket if I suffer from asthma or allergies?toggle

Yes, in fact an electric blanket can help alleviate asthma and allergy symptoms. Your mattress can contain up to two litres of moisture, not to mention the skin and hair cells that the human body sheds every day. This warm, humid environment is the perfect breeding ground for dust mites, which can trigger asthma and allergy symptoms. Regular use of an electric blanket will evaporate the moisture from your mattress, keeping your bed dry and healthy.

Our Safe & Sound Antibacterial electric blanket is ideal for asthma and allergy sufferers. This fully fitted electric blanket is made using Eastlon® antibacterial treated fibre to keep it fresher and more hygienic. Unlike other antibacterial treatments, Eastlon® is incorporated into the fibre so it won't wash out, even when washed regularly in hot water, as recommended for allergen control.

Can I use my electric blanket on a futon?toggle

No, Sunbeam electric blankets cannot be used on futons, as the uneven surface can cause damage to the heating wire, potentially resulting in a safety issue. If you have a futon, Sunbeam recommends using a Safe & SoundHeated Throw, which has flexible heating wire specially designed for this type of application. Always ensure that the throw rug is placed over the top of your body, not underneath you.

Can I use my electric blanket on a latex mattress?toggle

Yes, your Sunbeam Electric Blanket can be used on a latex mattress, providing that the blanket remains smooth and crease-free. Electric blankets should not be used on latex mattresses with uneven surfaces, such as those shaped like an egg carton.

Can I leave my electric blanket on the bed all year round?toggle

Yes, it is safe to leave your electric blanket on the bed all year round. Simply detach the controls and store in a safe, dry place during the warmer months. Several Sunbeam electric blankets, such as our Safe & Sound Quilted, Fleecy and Waterproof models, are actually designed to be used all year round as a comfortable underlay or mattress protector.

Can I store my blanket during the warmer months?toggle

Yes. While many of Sunbeam's Safe & Sound electric blankets are designed to stay on the bed year round as a comfortable underlay, you can store your blanket if you wish. Simply remove the controls, roll or fold the blanket loosely and place it in a plastic bag or blanket storage bag. Avoid pressing sharp creases into the blanket as this may damage the wiring. You do not need to add mothballs or other items to the blanket during storage.

Can I use a woollen underlay or mattress protector with my electric blanket?toggle

Yes, if you have a Safe & Sound electric blanket manufactured in 2005 or later, it can be used in conjunction with an underlay, providing it does not have a heavy rubber backing. The underlay or mattress protector can be placed either on top of the electric blanket or underneath it. Please note that your electric blanket may take longer to heat up should you place the underlay over the top of it.

If you have any other Sunbeam electric blanket (i.e. not Safe & Sound) or one manufactured before 2005, you should only place the underlay or mattress protector underneath the electric blanket. Placing a heavy underlay over the top of this type of blanket may trap the heat and inadvertently activate the safety overheat protection system, which cannot be reset.

If using a magnetic underlay, you should check with the supplier of the underlay to ensure its effectiveness when used in conjunction with an electric blanket.

Can I use my electric blanket on a waterbed?toggle

No, Sunbeam electric blankets cannot be used on waterbeds, as the uneven surface can cause damage to the heating wire, potentially resulting in a safety issue. If you have a waterbed, Sunbeam recommends using a Safe & Sound Heated Throw, which has flexible heating wire specially designed for this type of application. Always ensure that the throw rug is kept clear of any moving parts and is placed over the top of your body, not underneath you.

Does more heat settings mean a hotter electric blanket?toggle

No. The maximum temperature (and wattage) of the blanket is the same regardless of the number of settings. Setting 10 on a 10 heat control will produce the same heat as setting 3 on a 3 heat control. The more settings you have simply gives you greater choice and more control over the heat of the blanket.

How do I know if my old electric blanket is safe?toggle

Sunbeam recommends that you check your electric blanket regularly for signs of wear or damage, particularly on the power cord. If your blanket is more than 10 years old, it is recommended that you have it checked by a qualified service person, or replace it.

Recent changes to the Australian and New Zealand safety standards have made overheat protection mandatory on all electric blankets sold in Australia and New Zealand. While all Sunbeam electric blankets have contained overheat protection since 1991 (and most long before this), older blankets or other brands may not be equipped with this important safety feature.

How long do electric blankets take to heat up?toggle

Sunbeam's exclusive SleepPerfect® Technology heats the blanket to maximum temperature in just 10 minutes, so there's no need for hours of preheating before bedtime. A standard electric blanket can take up to 2 hours to reach maximum temperature.

Can I use my electric blanket on an adjustable bed?toggle

No, Sunbeam electric blankets cannot be used on adjustable beds, as this can cause damage to the heating wire and potentially result in a safety issue. If you have an adjustable bed, Sunbeam recommends using a Safe & Sound Heated Throw, which has flexible heating wire specially designed for this type of application. Always ensure that the throw rug is kept clear of any moving parts and is placed over the top of your body, not underneath you.

Can I use my electric blanket with a waterproof mattress protector?toggle

Yes, you can use your electric blanket with a waterproof mattress protector. If you have a Safe & Sound electric blanket*, it can be placed on top or underneath the mattress protector. If you have a Sunbeam electric blanket that is not from the Safe & Sound range, we recommend that you only place the blanket on TOP of the mattress protector.

Yes. Because Sunbeam's SleepPerfect® Technology constantly monitors the temperature of the blanket to prevent overheating, it is safe to place a mattress protector or fleecy underlay over the top of your electric blanket, providing it does not have a heavy rubber backing.

*Please note: this only applies to Safe & Sound Electric Blankets manufactured from 2005 onwards.

Can I wash my electric blanket?toggle

Yes, all Sunbeam electric blankets have detachable controls and waterproof elements, making them safe to wash by hand or in the washing machine. Simply remove the controls and wash the blanket by hand in warm water with a mild detergent, or on a delicate cycle. It can then be line or tumble dried.

Back to top

My Sunbeam Account and Enquiries

How do I create a 'My Sunbeam' account?toggle

  1. Simply click the “My Sunbeam” link, located at the top right side
  2. Click on the CREATE A MYSUNBEAM LOGIN button
  3. Enter your email account and a password in the fields provided. Your password must be between 6 and 20 characters containing numbers and letters only.
  4. Check your email account for the activation email
  5. Click the link to activate your account
  6. Once your account is activated, you may login to complete your details

Alternatively you may use your Facebook or Twitter account to create your MySunbeam account.

How can I contact you if I have an enquiry?toggle

If you have any questions about your MySunbeam accountor any other matters, please feel free to contact Sunbeam Customer Care on 1300 881 861 or email

customercare@sunbeam.com.au

Back to top

Buying Online

What can I purchase on the website?toggle

Most products and accessories are available to purchase online.

If there is a product you wish to purchase that is not available online, email info@sunbeam.com.au or call 1300 881 861.

Are your products factory seconds or second-hand?toggle

We will only sell brand new, in the box products. We sell no factory seconds or second-hand products on the website.

Are their any discounts to the prices?toggle

All products only available at Recommended Retail Price (RRP).

How do I place my first order online?toggle

  1. Add your item(s) to your shopping cart. When you are ready, “click” on the shopping cart icon and follow the instructions to complete your order. There are six stages of the checkout process:
  2. Your details: This section will confirm your name, email address
  3. Billing address. This section will allow you to choose the billing address associated with your payment method
  4. Delivery details: This section will allow you to choose the delivery address you would like your order delivered to.
  5. Payment: This section will prompt you to enter your payment method and details.
  6. Order confirmation: This will display your order number and order summary. A confirmation email will also be sent to the email address you supplied during checkout.

Tax invoice: This will be emailed to you once your product(s) has been despatched from our warehouse.

Which payment methods can I use to place my order?toggle

All payment(s) must be made on-line. We accept Visa, MasterCard and PayPal.

Can I order over the phone?toggle

Unfortunately we cannot take orders or your credit card details over the phone for security purposes; however we can step you through the proccess of purchasing products online.

Can I get copy of my Invoices?toggle

Yes, we will email you a copy of your tax invoice or you can download one from your My Sunbeam Account. If you have placed an order as a Guest, you will receive the tax invoice via email only.

Incorrect details on the order?toggle

We may be able to correct the details on your order. This is dependent on what stage of the process the order is. Please call 1300 881 861 to find out more. 

You can also update your details in your My Sunbeam Account for future purchases.

Won't accept my credit cardtoggle

We only accept Visa or Mastercard through our secure website or alternatively you can login to your PayPal account and use your preferred payment method.

Do you store my credit card detailstoggle

For your secutirty we DO NOT store your personal information all paymants are via Pay Pal which is our secure gateway for personal information and is stored on PayPal servers and is heavily guarded, both physically and electronically.

Back to top

Delivery

How are your products delivered?toggle

Sunbeam uses Australia Post to make deliveries to metropolitan and selected regional centres.

Do you deliver to my area?toggle

We deliver to all areas with in mainland Australia except for the following;

  • Lord Howe Island NSW 2989
  • Norfolk Island NSW 2899
  • Cocos Keeling Islands WA 6799
  • Australian Antaractic Territories TAS 7151

The estimated time for delivery will be between 3 to 10 business days. 

Can I select my delivery day?toggle

Unfortunately, you cannot. Please use your tracking number to check the status of your delivery. If you are not present, you will receive a card from Australia Post to collect your order from your nearest Australian Post Office.

Can I Track my Order?toggle

 

You can track your order history on your 'My Sunbeam' page of ‘My account’ if you are registered with us or contact Sunbeam customer care via email customercare@sunbeam.com.au and write your purchase order number in the subject field.

If you do not have a MySunbeam account, you may check the status of your order by completing the ‘Track your order’ option on the ‘Service & Support page

 

What is the status of my order?toggle

You can only check the status of your order if you have a MySunbeam account. Please see the following stages of an order;

  1. Submitted: Your order has been submitted and is being processed
  2. Order received: Your order has been received and ready to be picked
  3. Order is being picked: The products in your order are being picked
  4. Ready for despatch: Your order is ready for delivery
  5. Order shipped from distribution Centre: Your order is being delievered

How long will it take? Or I placed my order, how long will it take?toggle

It will take between 3 to 10 business days to be delivered. To track your order, please go to the website click on the “Service and Support Tab” and enter your Order Tracking Code in the field or login into your MySunbeam account

Alternatively, if you have a My Sunbeam account, log in to view your order status.

Driver came and left a note, need to reschedule deliverytoggle

Unfortunately, we are unable to arrange for another delivery. Please follow the instructions on the note to collect your delivery from your nearest Australian Post Office. 

What is the cost for delivery?toggle

Cost for deliveries for orders is $10.95 incl. GST

Back to top

Returns and Warranty

How do I returns or claim warranty?toggle

If you need to return a product, request for a warranty replacement or for any other matters within the warranty period, you can contact Sunbeam customer care via email customercare@sunbeam.com.au 

Back to top

FoodSaver

Can FoodSaver® bags be put into the freezer?toggle

Yes. The bags are ideal for the freezer because they will keep all air and moisture out, preventing food from getting freezer burn and becoming dry and tasteless.

Can FoodSaver® bags be boiled?toggle

FoodSaver® bags and rolls are simmer safe for sous vide cooking. Simmering is a food preparation technique in which foods are cooked in hot liquids kept just below the boiling point of water which is 100 °C.

Can FoodSaver® bags be put into the microwave?toggle

Yes. You can heat cooked foods, such as leftovers, in a FoodSaver® bag. The bags should never be used to cook raw foods. When microwaving, cut open a corner of the bag before putting it in the microwave so steam can escape. Avoid microwaving foods containing a lot of oil, as oil will get hot very quickly and could cause the sides of the bag to stick together.

What is FoodSaver?toggle

FoodSaver® is a vacuum sealing system that keeps your food fresher for longer.

Why are FoodSaver® containers and zipper bag accessories different from standard containers and zipper bags?toggle

Because FoodSaver® accessories are vacuum containers and vacuum zipper bags. FoodSaver® vacuum containers and vacuum zipper bags, work with FoodSaver® machines to vacuum air out to create an air-tight seal to lock in freshness and protect food from spoiling. Ordinary food storage containers and zipper bags trap the air in with your food, FoodSaver® vacuums the air out. Air is the enemy of fresh, as oxygen and moisture in the air causes food to degrade over time and lose flavour, texture and nutritional value.

Can FoodSaver® bags be re-sealed?toggle

Yes. Just cut off the existing seal, remove as much food as you need, then re-vacuum the bag. Be sure to wipe off any food or grease residue inside the bag near the seal area. You can also re-seal FoodSaver® bags after you have washed them.

Which side of the bag should be placed in the vacuum channel?toggle

Place the embossed (rough) side down. If the bag is curling (the end of the roll may do this), place the curled side down over the seal bar.

Air was removed from the bag, but now it has re-entered.toggle

Examine seal of bag. A wrinkle along the seal may cause leakage and allow air to enter. Simply cut bag and reseal. Sometimes moisture or food material (such as juices, grease, crumbs, powders, etc.) along seal prevents bag from sealing properly. Cut the bag open, wipe top inside of bag and reseal.

If you are vacuum sealing sharp food items, the bag may have been punctured. Use a new bag if there is a hole. Cover sharp food items with a soft cushioning material and reseal.

Are FoodSaver® bags and rolls recyclable?toggle

FoodSaver® bags are BPA free, and made of polyethylene (a type of plastic) with an outer layer of nylon for added strength and rigidity. The bags are recyclable under the "Other" category. Please follow the recycling guidelines and requirements of your local municipality.

Can FoodSaver® bags be washed?toggle

Yes, but it depends on the previous contents of the bag. Bags that previously contained fruits, vegetables, breads and dry goods can be washed and reused. Bags that contained raw meats, fish, eggs or un-pasteurized cheese should be discarded after use because they may contain invisible bacteria that will remain after washing. Bags that contained greasy or oily foods should also be discarded, as they may be difficult to clean. FoodSaver® Bags can be washed by hand. Dry completely. They can then be re-vacuumed.

What is vacuum sealing?toggle

FoodSaver® is a vacuum seal system that vacuums air out from bags and containers and then creates a commercial quality air-tight seal to lock in freshness and protect food from spoiling. Air is the enemy of fresh, as oxygen and moisture in the air causes food to degrade over time and lose flavour, texture and nutritional value. Ordinary food storage methods trap the air in with your food, FoodSaver® vacuums the air out.

Are FoodSaver® bags BPA free?toggle

Yes.

How long can the FoodSaver® system keep my food fresh?toggle

FoodSaver® vacuums air out, then creates a commercial quality seal so food stays fresh up to 5X longer using FoodSaver® bags and rolls. Using the reusable FoodSaver® containers and zipper bags, keeps food fresh up to 2X longer.

What are the benefits of vacuum sealing?toggle

You save money:

  • because foods keep their freshness up to five times longer. And, Foods don't get freezer burn for several years because they don't come in contact with cold, dry air.
  • Foods last longer, so you throw less away.
  • You can buy lower-priced bulk quantities and re-package at home into smaller portions exactly the size you want.
  • Leftovers stay fresh in the freezer for several months.

You save time:

  • Make fewer trips to the grocery store because foods will last longer.
  • Cook several portions when you have time and vacuum seal single servings in a bag or right onto plates.
  • Marinate meat and fish in minutes instead of hours.

Also:

  • Enjoy your favourite foods all year, even when they are out of season.
  • Protect non-food items from corrosion and moisture-damage.
  • Create first aid and emergency kits in the home, car and boat.
  • Outdoor enthusiasts can vacuum seal supplies to keep them clean and dry.

Back to top